Freud Wood Saw Blades

Desc

Items 1-20 of 27

View as List Grid
per page
  1. $119.12
    10"HARDIE BLADE

    Diablo HardieBlade™ is the only approved PCD (PolyCrystalline Diamond) tipped fiber cement blade recommended by James Hardie Building Products. Diablo Fiber Cement Blades generate up to 5% less respirable dust*, while delivering the longest life in all fiber cement materials. Diablo PCD Hardieblades feature a unique, spark-eroded Triple Chip grind for long life – up to 60 times the life in fiber cement of conventional carbide blades Diablo PCD Hardieblades are perfect for full time use in heavy duty applications like cutting multiple pieces of fiber cement board. * Dust generation does not necessarily correlate directly to exposure risk.

    Learn More
  2. $42.85
    10"X24t COMBO/RIP BLD

    Diablo's blade cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding with the smoothest, fastest and most accurate cut. The thin kerf design requires less cutting power from the user and the saw for better control over the cut. Diablo′s unique design, extra-tough steel plate and proprietary carbide tips deliver longer life — and frames more houses — than other framing blades. Ideal for general construction applications, including fast, efficient ripping and crosscutting

    Learn More
  3. $54.15
    10"X40t COMBO/RIP BLADE

    Diablo's general purpose blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo's blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks. Use it for rip cuts with a smoother finish than dedicated ripping blades, or make quality crosscuts in solid wood or plywood. Great for both sliding and “chop” style miter saws as well as table saws.

    Learn More
  4. $55.90
    10"X50t CROSS CUT BLD

    Diablo's combination blade is ideal for ripping and crosscutting wood & wood composites with the goal of a smooth finish. The best choice for a table saw when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by a large gullet. Diablo's large gullet provides the chip removal space required while ripping and the close grouping of teeth within the set provide the smaller bite size required when crosscutting.

    Learn More
  5. $60.05
    10"X60t TRIM BLD

    Fine Finish blades let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. Diablo's particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood, and moulding.

    Learn More
  6. $135.24
    10"X80T ATB CARB BLADE

    This Ultimate Cut-Off blade's teeth actually polish the material as it cuts. New laser-cut anti-vibration slots practically eliminate the vibration that resonates in standard blades, producing glass-smooth finishes. With a finish this perfect you won’t need stabilizers!

    Learn More
    Out of stock
  7. $106.94
    10X50X5/8 COMBO CRB BLAD

    This ultimate combination blade combines one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate combination blade, there is no need for stabilizers.

    Learn More
  8. $108.72
    10X60X5/8 CARBIDE BLD CROSSCUT ATB

    This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results..

    Learn More
    Out of stock
  9. $115.97
    10X60X5/8 TCG CARBIDE BLD

    This multi-purpose blade will cut stacks of manmade wood products as well as hardwood and softwood up to 2-3/4" thick. The blade’s deep gullets and TCG rip and crosscut through hardwoods and softwoods with ease. Although the ideal working range is 1/2" to 2-3/4" thick, thinner or thicker materials may be cut, resulting in some loss of surface finish

    Learn More
    Out of stock
  10. $110.19
    10X80X5/8 ATB THIN KERF COATED

    This thin kerf blade produces glass smooth surfaces when crosscutting hardwoods and softwoods, thanks to Freud’s unique side grinding technology. The larger blades are ideal for miter box applications. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results

    Learn More
    Out of stock
  11. $157.23
    10X80X5/8 TCG DBL SD BLADE

    Designed to give long life and excellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with this blade!

    Learn More
    Out of stock
  12. $51.90
    12"X44t CROSS CUT BLD

    Diablo's general purpose blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo's blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks. Use it for rip cuts with a smoother finish than dedicated ripping blades, or make quality crosscuts in solid wood or plywood. Great for both sliding and “chop” style miter saws as well as table saws.

    Learn More
  13. $95.95
    12X100TH ULTRA FINE BLADE

    Diablo’s new Ultimate Polished Finish saw blades feature Axial Shear Face Grind (ASFG) that cleanly shears through materials for superior quality finishes on fine molding, hardwoods, softwoods, veneered plywood, melamine and more. Also featuring Double-Side Grind tooth geometry, an incredible 200 additional grinds, this blade produces precise, polished-like cuts equal to that of 220-grit sandpaper or higher. Diablo’s proprietary TiCo Hi-Density Carbide is designed specifically to deliver extreme durability and 5X longer life on materials requiring polished-like finishes. Unlike other blades on the market, Diablo’s Ultimate Polished Finish saw blades have a laser-cut, ultra-thin kerf blade design for fast, effortless cuts on corded or cordless saws making this the go-to blade when working at a permanent location or at a portable jobsite. Diablo’s new Ultimate Polished Finish saw blades are REDefining cutting by introducing radical technology to maximize performance and extend cutting life, saving the PRO both time and money when completing their projects.

    Learn More
  14. $116.05
    14" X 1"COMBINATION BLADE

    Fine Finish blades let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. (Blades ending in “S” are also ideal for radial arm saws). It's ideal for crosscutting oak, pine, melamine, plywood, and molding.

    Learn More
  15. $124.58
    14"X24T CARBIDE BLADE

    This blade is ideal for high-speed ripping operations in hardwood and softwood. The low tooth count also makes this blade ideal for ripping thick material. It can be used with manual feeding as well as with power feeders in single or gang-ripping operations. The ideal working range is 1-1/2" to 3-1/2" thick. Thinner or thicker material may be cut, but some loss of surface finish may occur.

    Learn More
    Out of stock
  16. $187.10
    16-5/16"-60t CARB BLADE

    Diablo Beam Saw Blades are designed for large capacity beam, post and timber cutting. 16-5/16-Inch Beam Saw Blade is ideal for timber framing such as LVL, Gleams and Parlays. Cuts up to 6 1/4-Inch at 9 Degrees and 4 3/16-Inch at 45 Degrees. 16-5/16-Inch by 6t ATB 1-Inch arbor. Design for Makita® Beam Saw.

    Learn More
  17. $16.54
    6-1/2" 24T DIABLO BLADE

    Diablo's thin kerf trim saw blade is ideal for portable and low powered saws on the jobsite. Diablo's trim saw blade is proven to extend run time on Porter Cable®, Saw Boss, and similar trim saws.

    Learn More
  18. $5.22
    7-1/4" 24T FRAMING CIRCULAR SAW BLADE

    The Avanti 7-1/4 in. x 24-Tooth Framing Circular Saw Blade is an economical, high-performance blade that can be sharpened when needed to extend its service life. The high-quality steel is manufactured with carbide and lasts up to 30 times longer than regular steel blades. It is designed for DIY projects and construction use and is ideal for softwood, pressure-treated beams and oriented-strand board (OSB).

    Learn More
  19. $23.60
    7-1/4" 40T COATED CIRCULAR SAW BLADE

    Diablo's Finishing blade is ideal for smooth finish crosscuts in hardwood, softwood or plywood. Diablo Finish blades are the perfect choice for excellent rips and crosscuts using a portable saw. They deliver a smoother edge than framing blades, but still provide an excellent combination of cutting speed and long life. A great choice for jobsite finish cuts in 1X, decking, fencing, fascia and plywood

    Learn More
    Out of stock
  20. $28.40
    7-1/4" 60T DIABLO CIRCULAR SAW BLADE

    Diablo's Finishing blade is ideal for smooth finish crosscuts in hardwood, softwood or plywood. Diablo Finish blades are the perfect choice for excellent rips and crosscuts using a portable saw. They deliver a smoother edge than framing blades, but still provide an excellent combination of cutting speed and long life. A great choice for jobsite finish cuts in 1X, decking, fencing, fascia and plywood

    Learn More
Desc

Items 1-20 of 27

View as List Grid
per page
To Top