SPX/Power Team Pullers

The non-skid space-age reinforced inflatable jack is perfect for many applications. Highly flexible and lightweight jacks only require an air supply of 8 bar (116 psi) maximum. Water or non-explosive gas can also be used for inflation. Un-inflated jacks are less than 25 mm (1 in.) thick, making lifting tasks in small spaces seem routine. Constructed of non-conducting, high quality rubber material with multi-layer aramid fiber reinforcement. Samples of jacks are pressure tested to 20 bar and cycle tested (10,000 inflate / deflate cycles at 8 bar for 10,000 inflate / deflate cycles). The controller, shut-off and air hoses are all equipped with an industrial interchange style quick disconnect air coupler. Female half coupler bodies have a locking collar to help the operator avoid accidentally disconnecting the jack while under load.

17 1/2, 30 and 50 Ton Capacity Hydraulic Puller Sets

You'll find a puller for just about every job. Included in this "master set" are 17 1/2, 30, and 50 ton hydraulics, along with an extensive assortment of pullers, attachments, and adapters.

17 1/2 and 30 Ton Capacity Hydraulic Puller Sets

These heavy-duty maintenance sets will more than pay for themselves, especially in saving you costly damage to parts. This set lets you tackle hundreds of applications where pushing and pulling are required.

Jaw Puller, Jaw Reach 15-1/4 In., Jaw Spread 15-1/2 In., Capacity 13 tons, Number of Jaws 2, Jaw Style Nonreversible, Screw Size 13/16 In.-16 x 12 In., Screw Length 13/16 In., Locking No, Features Forged from Quality Steel Which Exceed The Rated Capacity.

Jaw Puller, Jaw Reach 18-3/4 In., Jaw Spread 16 In., Capacity 17-1/2 tons, Number of Jaws 2, Jaw Style Nonreversible, Screw Size 1 In.-14 x 13-1/2 In., Screw Length 1 In., Locking No, Features Forged Steel Exceed Rated Capacity

Jaw Puller, Jaw Reach 3-1/4 In., Jaw Spread 6 In., Capacity 5 tons, Number of Jaws 2, Jaw Style Reversible, Screw Size 9/16 In.-20 x 6-15/16 In., Screw Length 9/16 In., Locking No, Features Forged from Quality Steel Which Exceed The Rated Capacity

Jaw Puller, Jaw Reach 15-1/4 In., Jaw Spread 15-1/2 In., Capacity 13 tons, Number of Jaws 2, Jaw Style Nonreversible, Screw Size 13/16 In.-16 x 12 In., Screw Length 13/16 In., Locking No, Features Forged from Quality Steel Which Exceed the Rated Capacity.

Jaw Puller, Jaw Reach 3-1/4 In., Jaw Spread 4-3/4 In., Capacity 2 tons, Number of Jaws 2 or 3, Jaw Style Reversible, Screw Size 3/8 In.-24 x 4-7/8 In., Screw Length 3/8 In., Locking No, Features Forged from Quality Steel Which Exceed the Rated Capacity.

Jaw Puller, Jaw Reach 5-1/2 In., Jaw Spread 7 In., Capacity 5 tons, Number of Jaws 2 or 3, Jaw Style Reversible, Screw Size 9/16 In.-20 x 6-15/16 In., Screw Length 9/16 In., Locking No, Features Forged from Quality Steel Which Exceed The Rated Capacity.

SPX Power Team 2/3 Reversible Jaw Pullers Manual 7 Ton Capacity

Choosing the right size puller: Compare the “reach” and “spread” of the pulling job with that of the pullers listed. The puller selected must have dimensions greater than those of the job.

Hydra Grip-O-Matic® pulling system - These pullers are ideal for pulling a wide variety of press-fitted parts including bushings, bearings, wheels, gears and pulleys. Grip-O-Matic® pullers have been rigorously tested for top performance and reliability. PH82K is a complete pulling system which includes a hydraulic power module, 2-way puller head, jaws, legs and bearing splitter attachment; all contained in a convenient carrying case.

30 Ton Capacity Hydraulic Puller Sets

Just what you need for those big jobs. Not only do you get a 30 ton hydraulic Push-Puller®, you also get a 2-jaw and 3-jaw hydraulic puller. Plus, many popular accessories and the hardware to tackle the big jobs right away.

Hydra Grip-O-Matic® pulling system - These pullers are ideal for pulling a wide variety of press-fitted parts including bushings, bearings, wheels, gears and pulleys. Grip-O-Matic® pullers have been rigorously tested for top performance and reliability. PH82K is a complete pulling system which includes a hydraulic power module, 2-way puller head, jaws, legs and bearing splitter attachment; all contained in a convenient carrying case.

10-ton manual puller set This puller set is just what you need for removing gears, bearings, etc. Includes pullers, attachments, and many accessories.

17 1/2 and 50 Ton Capacity Hydraulic Puller Sets

If you are looking for a maintenance puller set that will handle a wide variety of applications, this one is for you. The mechanical and hydraulic pullers and attachments are designed to handle most removing and installing jobs with a minimal amount of effort.

Hydra Grip-O-Matic® pulling system - These pullers are ideal for pulling a wide variety of press-fitted parts including bushings, bearings, wheels, gears and pulleys. Grip-O-Matic® pullers have been rigorously tested for top performance and reliability. PH82K is a complete pulling system which includes a hydraulic power module, 2-way puller head, jaws, legs and bearing splitter attachment; all contained in a convenient carrying case.