Carbide Saw Blades

Desc

Items 1-20 of 45

View as List Grid
per page
  1. $115.55
    10" 80T NON-FERROUS BLADE

    This thin kerf heavy-duty, non-ferrous metal cutting blade produces an excellent finish. These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life. Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended.

    Learn More
  2. $91.30
    10" CIRCULAR SAW BLADE 180 TOOTH PLYWOOD/OSB/VENEER 5/PK
    This IRWIN Steel Circular Saw Blade is made with precision-ground circular saw teeth for smooth, accurate cuts. Its fully-hardened circular saw blade plate runs truer, longer, and the heavy-gauge, high-carbon steel construction provides an extended circular saw blade life. Learn More
  3. $84.50
    10"NONFERROUS/LAMINATES

    Diablo's next generation Aluminum saw blades are optimized for cutting thin (up to 1/8”), medium (3/32”-1/4”) and thick (3/16”-7/16”) aluminum metals. Featuring the new, specially formulated Diablo TiCo™ Super-Density Micro-Grain Carbide, these radical blades withstand impact, reduce wear, provide clog free cuts and last longer than standard carbide in metal cutting applications. The specially formulated metal cutting carbide teeth feature a Triple Chip Grind (TCG) Tooth Design for clean, burr-free finishes, virtually eliminating any type of rework. Tri-Metal Shock Resistant Brazing allows these Aluminum blades to slice through metal materials while withstanding extreme impact for maximum durability.

    Learn More
    Out of stock
  4. $156.39
    10"X100th NON FERROUS BLD

    This blade produces a smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metal extrusions. A high tooth count with a 5° hook angle allows the teeth to slice efficiently through the material without binding. The requirements on the cutting edge greatly differ with nonferrous metals than with cutting wood. With this in mind, Freud formulated a special carbide with high impact strength for this blade. Freud recommends use of a liquid lubricant when cutting non-ferrous materials. This can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts. Wax sticks are not recommended.

    Learn More
    Out of stock
  5. $42.85
    10"X24t COMBO/RIP BLD

    Diablo's blade cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding with the smoothest, fastest and most accurate cut. The thin kerf design requires less cutting power from the user and the saw for better control over the cut. Diablo′s unique design, extra-tough steel plate and proprietary carbide tips deliver longer life — and frames more houses — than other framing blades. Ideal for general construction applications, including fast, efficient ripping and crosscutting

    Learn More
  6. $54.15
    10"X40t COMBO/RIP BLADE

    Diablo's general purpose blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo's blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks. Use it for rip cuts with a smoother finish than dedicated ripping blades, or make quality crosscuts in solid wood or plywood. Great for both sliding and “chop” style miter saws as well as table saws.

    Learn More
  7. $55.90
    10"X50t CROSS CUT BLD

    Diablo's combination blade is ideal for ripping and crosscutting wood & wood composites with the goal of a smooth finish. The best choice for a table saw when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by a large gullet. Diablo's large gullet provides the chip removal space required while ripping and the close grouping of teeth within the set provide the smaller bite size required when crosscutting.

    Learn More
  8. $60.05
    10"X60t TRIM BLD

    Fine Finish blades let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. Diablo's particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood, and moulding.

    Learn More
  9. $135.24
    10"X80T ATB CARB BLADE

    This Ultimate Cut-Off blade's teeth actually polish the material as it cuts. New laser-cut anti-vibration slots practically eliminate the vibration that resonates in standard blades, producing glass-smooth finishes. With a finish this perfect you won’t need stabilizers!

    Learn More
    Out of stock
  10. $106.94
    10X50X5/8 COMBO CRB BLAD

    This ultimate combination blade combines one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate combination blade, there is no need for stabilizers.

    Learn More
  11. $108.72
    10X60X5/8 CARBIDE BLD CROSSCUT ATB

    This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results..

    Learn More
    Out of stock
  12. $115.97
    10X60X5/8 TCG CARBIDE BLD

    This multi-purpose blade will cut stacks of manmade wood products as well as hardwood and softwood up to 2-3/4" thick. The blade’s deep gullets and TCG rip and crosscut through hardwoods and softwoods with ease. Although the ideal working range is 1/2" to 2-3/4" thick, thinner or thicker materials may be cut, resulting in some loss of surface finish

    Learn More
    Out of stock
  13. $135.92
    10X72X5/8 TCG BLADE

    This heavy-duty, non-ferrous metal cutting blade produces an excellent finish. These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life. Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended

    Learn More
  14. $110.19
    10X80X5/8 ATB THIN KERF COATED

    This thin kerf blade produces glass smooth surfaces when crosscutting hardwoods and softwoods, thanks to Freud’s unique side grinding technology. The larger blades are ideal for miter box applications. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results

    Learn More
    Out of stock
  15. $157.23
    10X80X5/8 TCG DBL SD BLADE

    Designed to give long life and excellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with this blade!

    Learn More
    Out of stock
  16. $79.95
    12"X1"arb 90t NON-FERROUS BLADE
    Hitachi 12" Triple Chip 90 Tooth tungsten Carbide Circular Saw Blade can be used for dry or wet cutting in a variety of applications from cutting brass, aluminum, copper or other non-ferrous metals, when well lubricated, to cutting wood and plastics cleanly in dry cutting. Learn More
  17. $51.90
    12"X44t CROSS CUT BLD

    Diablo's general purpose blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo's blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks. Use it for rip cuts with a smoother finish than dedicated ripping blades, or make quality crosscuts in solid wood or plywood. Great for both sliding and “chop” style miter saws as well as table saws.

    Learn More
  18. $98.90
    12"X96t FINISH BLD

    Diablo's next generation Aluminum saw blades are optimized for cutting thin (up to 1/8”), medium (3/32”-1/4”) and thick (3/16”-7/16”) aluminum metals. Featuring the new, specially formulated Diablo TiCo™ Super-Density Micro-Grain Carbide, these radical blades withstand impact, reduce wear, provide clog free cuts and last longer than standard carbide in metal cutting applications. The specially formulated metal cutting carbide teeth feature a Triple Chip Grind (TCG) Tooth Design for clean, burr-free finishes, virtually eliminating any type of rework. Tri-Metal Shock Resistant Brazing allows these Aluminum blades to slice through metal materials while withstanding extreme impact for maximum durability.

    Learn More
  19. $95.95
    12X100TH ULTRA FINE BLADE

    Diablo’s new Ultimate Polished Finish saw blades feature Axial Shear Face Grind (ASFG) that cleanly shears through materials for superior quality finishes on fine molding, hardwoods, softwoods, veneered plywood, melamine and more. Also featuring Double-Side Grind tooth geometry, an incredible 200 additional grinds, this blade produces precise, polished-like cuts equal to that of 220-grit sandpaper or higher. Diablo’s proprietary TiCo Hi-Density Carbide is designed specifically to deliver extreme durability and 5X longer life on materials requiring polished-like finishes. Unlike other blades on the market, Diablo’s Ultimate Polished Finish saw blades have a laser-cut, ultra-thin kerf blade design for fast, effortless cuts on corded or cordless saws making this the go-to blade when working at a permanent location or at a portable jobsite. Diablo’s new Ultimate Polished Finish saw blades are REDefining cutting by introducing radical technology to maximize performance and extend cutting life, saving the PRO both time and money when completing their projects.

    Learn More
  20. $116.05
    14" X 1"COMBINATION BLADE

    Fine Finish blades let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. (Blades ending in “S” are also ideal for radial arm saws). It's ideal for crosscutting oak, pine, melamine, plywood, and molding.

    Learn More
Desc

Items 1-20 of 45

View as List Grid
per page
To Top