Heavy Equipment Jacks/Movers
- $592.001.1 TON INFLATABLE JACK 3.1 LIFT
The non-skid space-age reinforced inflatable jack is perfect for many applications. Highly flexible and lightweight jacks only require an air supply of 8 bar (116 psi) maximum. Water or non-explosive gas can also be used for inflation. Un-inflated jacks are less than 25 mm (1 in.) thick, making lifting tasks in small spaces seem routine. Constructed of non-conducting, high quality rubber material with multi-layer aramid fiber reinforcement. Samples of jacks are pressure tested to 20 bar and cycle tested (10,000 inflate / deflate cycles at 8 bar for 10,000 inflate / deflate cycles). The controller, shut-off and air hoses are all equipped with an industrial interchange style quick disconnect air coupler. Female half coupler bodies have a locking collar to help the operator avoid accidentally disconnecting the jack while under load.
Learn More - $5,670.00100T 13-1/8" STROKE CYL
Perfect for bridge lifting, building reconstruction, shipyard, utility and mining equipment maintenance. Aluminum bronze overlay bearings provide long life, chrome plated piston rod resists corrosion. Load cap snaps out to expose internal piston rod threads for pulling applications; threads withstand full tonnage. Grooved ring pattern in load cap helps guard against load slippage. Each cylinder has two 9796 3/8" NPTF female half couplers. Built-in safety relief valve prevents over-pressurization of the retract circuit. Feature mounting holes and collar threads.
Learn More - $1,578.00100T 2-1/4" STROKE CYLPower Tech plated piston rods and gland nuts resist scoring and corrosion. Heavy duty return spring (except for double-acting models) provides fast piston return & low collapsed height. Coupler on 10 thru 50-ton models is angled upward 5° for added clearance. Grooved piston top keeps load from sliding. Cylinders can be “dead-ended” at full capacity. Removable carrying handles on 100 ton and 250-ton models. Learn MoreOut of stock
- $3,756.00100TON 10-1/4" STROKE CYL
Single-Acting, Spring-Return. Rugged and high quality general purpose cylinder used for lifting and pressing.
Learn More - $2,919.00100TON 6-5/8" STROKE CYL
Aluminum bronze bearing reduces wear caused by off-center loads. Maximum sized springs speed piston return and increase spring life. Wide range of accessories available to thread onto piston rod, collar, or onto cylinder base. Single-Acting, Spring-Return. Rugged and high quality general purpose cylinder used for lifting and pressing.
Learn More - $525.0010T 1-1/2" STROKE CYLPower Tech plated piston rods and gland nuts resist scoring and corrosion. Heavy duty return spring (except for double-acting models) provides fast piston return & low collapsed height. Coupler on 10 thru 50-ton models is angled upward 5° for added clearance. Grooved piston top keeps load from sliding. Cylinders can be “dead-ended” at full capacity. Removable carrying handles on 100 ton and 250-ton models. Learn More
- $980.0010T 2-1/2" STROKE CYLInterchangeable piston head inserts provide versatility of application. 12, 20, 30, 60, 60 ton single-acting models feature threaded collar Withstands full "dead-end" loads. Corrosion resistant standpipe has "Power Tech" treatment All cylinders except RH120 are furnished with a 9796 3/8" NPT female half coupler Aluminum cylinder body. Learn More
- $525.0010T 7/16" STROKE CYLCylinder body, piston and gland nut “Power Tech” treated for corrosion and abrasion resistance. Standard domed piston rod (5-30 ton) or swivel cap (50- 150 ton) minimize effects of off-center loading. Unique heavy duty spring provides fast piston return. A 9796 3/8" NPTF female half coupler is standard with each cylinder (the RLS50 has a 3/8" coupler which is not angled). Oil ports are 3/8" NPTF. Couplers on all cylinders, except RLS50, are angled upward for extra clearance. Learn More
- $430.0010TON 1" STROKE CYL
Aluminum bronze bearing reduces wear caused by off-center loads. Maximum sized springs speed piston return and increase spring life. Wide range of accessories available to thread onto piston rod, collar, or onto cylinder base. Single-Acting, Spring-Return. Rugged and high quality general purpose cylinder used for lifting and pressing.
Learn More - $780.0010TON 12-1/8" STROKE CYL
Aluminum bronze bearing reduces wear caused by off-center loads. Maximum sized springs speed piston return and increase spring life. Wide range of accessories available to thread onto piston rod, collar, or onto cylinder base. Single-Acting, Spring-Return. Rugged and high quality general purpose cylinder used for lifting and pressing.
Learn More - $881.0010TON 16" STROKE CYL
Aluminum bronze bearing reduces wear caused by off-center loads. Maximum sized springs speed piston return and increase spring life. Wide range of accessories available to thread onto piston rod, collar, or onto cylinder base. Single-Acting, Spring-Return. Rugged and high quality general purpose cylinder used for lifting and pressing.
Learn More - $441.0010TON 2-1/8" STROKE CYL
Aluminum bronze bearing reduces wear caused by off-center loads. Maximum sized springs speed piston return and increase spring life. Wide range of accessories available to thread onto piston rod, collar, or onto cylinder base. Single-Acting, Spring-Return. Rugged and high quality general purpose cylinder used for lifting and pressing.
Learn More - $478.0010TON 4-1/8" STROKE CYL ES104
Aluminum bronze bearing reduces wear caused by off-center loads. Maximum sized springs speed piston return and increase spring life. Wide range of accessories available to thread onto piston rod, collar, or onto cylinder base. Single-Acting, Spring-Return. Rugged and high quality general purpose cylinder used for lifting and pressing.
Learn More - $534.0010TON 6-1/8" STROKE CYL
Aluminum bronze bearing reduces wear caused by off-center loads. Maximum sized springs speed piston return and increase spring life. Wide range of accessories available to thread onto piston rod, collar, or onto cylinder base. Single-Acting, Spring-Return. Rugged and high quality general purpose cylinder used for lifting and pressing.
Learn More - $806.0012T 1-5/8" STROKE CYLInterchangeable piston head inserts provide versatility of application. 12, 20, 30, 60, 60 ton single-acting models feature threaded collar Withstands full "dead-end" loads. Corrosion resistant standpipe has "Power Tech" treatment All cylinders except RH120 are furnished with a 9796 3/8" NPT female half coupler Aluminum cylinder body. Learn More
- $473.0013 TON BOTTLE JACK 10" STROKE
Telescoping jacks offer all the quality features and capabilities of the standard bottle jack line with a bonus. The super-long stroke of these jacks saves time and effort by eliminating the need to lift, crib, lift, etc. In most applications, the user can place the jack once and complete the lift. The taller 9006X, 9011X and 9013X all feature a unique beveled base that allows the jack to “follow” the load laterally as it is raised, greatly reducing side-loading of the piston.
Learn More - $948.0015TON 10-1/8" STROKE CYLAluminum bronze bearing reduces wear caused by off-center loads. Maximum sized springs speed piston return and increase spring life. Wide range of accessories available to thread onto piston rod, collar, or onto cylinder base. Single-Acting, Spring-Return. Rugged and high quality general purpose cylinder used for lifting and pressing. Learn More
- $1,146.0015TON 12-1/8" STROKE CYLAluminum bronze bearing reduces wear caused by off-center loads. Maximum sized springs speed piston return and increase spring life. Wide range of accessories available to thread onto piston rod, collar, or onto cylinder base. Single-Acting, Spring-Return. Rugged and high quality general purpose cylinder used for lifting and pressing. Learn More
- $1,252.0015TON 14-1/8" STROKE CYLAluminum bronze bearing reduces wear caused by off-center loads. Maximum sized springs speed piston return and increase spring life. Wide range of accessories available to thread onto piston rod, collar, or onto cylinder base. Single-Acting, Spring-Return. Rugged and high quality general purpose cylinder used for lifting and pressing. Learn MoreOut of stock
- $635.0015TON 4-1/8" STROKE CYLAluminum bronze bearing reduces wear caused by off-center loads. Maximum sized springs speed piston return and increase spring life. Wide range of accessories available to thread onto piston rod, collar, or onto cylinder base. Single-Acting, Spring-Return. Rugged and high quality general purpose cylinder used for lifting and pressing. Learn More