Presses

Desc

5 Items

View as List Grid
per page
  1. $1,971.00
    10T PRESS 10-1/8" STROKE

    Bench press has 15 3/8" x 18" work area; floor press bed height is adjustable from 5" to 41" with horizontal “daylight” of 21". Choices of power sources: single-speed hand pump, electric/hydraulic or air/hydraulic. Hydraulic gauges, hoses and fittings included.

    Learn More
  2. $7,118.00
    25T ELEC PRESS 6" STROKE

    Stroke length limited to 6 1/4" on economy models. Press bed height easily adjustable with winch. Bed will not drop when handle is released. Choice of power sources for rapid cylinder advance: two-speed hydraulic hand pump, electric/hydraulic or air/hydraulic.

    Learn More
  3. $6,389.00
    25T PRESS 14-1/4" STROKE

    Cylinder can be mounted on frame extension to handle jobs which won't fit between uprights. Open Throat press models are also available with remote control to enable the operator to view work from all sides with fingertip control of cylinder piston travel. Off-center pressing loads of full capacity can be applied across entire width of frame. Press bed height easily adjustable with winch. Bed will not drop when handle is released. Choice of power sources for rapid cylinder advance: two-speed hydraulic hand pump, electric/hydraulic or air/hydraulic.

    Learn More
  4. $29,546.00
    80TON ROLL BED PRESS W/PQ1204S 460V 3-PHASE

    The original, patented Roll-Bed® design. Bed rolls out for easy loading and unloading with a crane or other lifting device. Movable work head glides easily side-to-side for full off-center load capacity across width of upper frame. “Daylight” is 50 1/2" x 60" for 80 and 100-ton models; 51 1/4" x 64" on 150 and 200-ton presses. Fast approach of double-acting, 13 1/8" stroke cylinder is provided by PQ1204S “Quiet” electric/hydraulic pump with remote control hand switch. Operator can view work from all sides with fingertip control of cylinder piston travel.

    Learn More
  5. $22,131.00
    SPX 100 TON H FRAME PRESS

    Cylinder work head glides across upper frame on rollers, locks in place for off-center pressing jobs. May be used horizontally for special pressing applications with user supplied supports Press bed is raised and lowered by winch which locks in place for insertion of bed retaining pins. Upper bolster can be lowered 8" for convenient positioning on repetitive jobs. Generous "daylight" of 42" x 50" accommodates bulky work pieces, uprights are placed for easy side entry of bars or shafts for straightening or bending Choice of single or double-acting cylinder. Hydraulic pump options include: 2-speed hand pump with large 2-gallon reservoir, PE172 electric/hydraulic pump or "PQ" series "Quiet" electric/hydraulic pump with low noise.

    Learn More
Desc

5 Items

View as List Grid
per page
To Top